Hi
just update our server to 5.3 and when I started Empadminhelperfull it doesn’t show who is online anymore.
It shows (3) under the online button but the list of players to the left of this is now empty.
Same problem here
Missing paramter for cmd id Request_Player_Info
Missing paramter for cmd id Request_Get_Factions
Hi
SO finally got around to download the latest version. Copied all across to current 1.29 folder.
Try running it and it goes not responding?
5.3 needs an tool update to work properly!
See here: EAH latest versions & patchnotes
Still issues - still don’t see players in list but as per telnet they are connected. also faction errors
also no green block to the far left list of all players to show they are online
Missing paramter for cmd id Request_Get_Factions
ModInterface: Connected with ModProtocol
DisconnectedDelegate called
Missing paramter for cmd id Request_Get_Factions
Uptime=02h01m heap= 139MB fps= 20 players= 4 pfs=r0/i2/a3
ModInterface: Connected with ModProtocol
DisconnectedDelegate called
Missing paramter for cmd id Request_Get_Factions
ModInterface: Connected with ModProtocol
Total number of playfield server processes: 5
Reserve processes: available: 2 (4564 10008) + requested: 0
> 09 Thunder
3. Acilaris Planet (PID: 5472)
> 11 jdvanzyl1986
> 07 Wolfbiteme
2. Alderaan (PID: 18264)
> 06 Volcane
- Tatooine Moon (PID: 3004)
Playfield servers connected (3)
Total number of playfield server processes: 5
Reserve processes: available: 2 (4564 10008) + requested: 0
> 09 Thunder
- Acilaris Planet (PID: 5472)
> 11 jdvanzyl1986
> 07 Wolfbiteme
- Alderaan (PID: 18264)
> 06 Volcane
- Tatooine Moon (PID: 3004)
Playfield servers connected (3)
=
= Seed: 233243
= Name: NewGame_Test
= Mode: Survival
= Port: 30000
= Version: Alpha 5.3.0 0857
=
= Empyrion dedicated server
as Silvrav said
Still not working to show online players
Please update the version. For alpha 5.3 you need the new Version 1.32.2
And this time you have to stop the server and then restart the tool to update the new mod!
Using 1.32.2
Requesting surplus server with PID 14764 to shut down
Missing paramter for cmd id Request_InGameMessage_AllPlayers
Missing paramter for cmd id Request_Get_Factions
Did you stop the server, then restart the tool, then start the server?
Or if you restart the tool, does he still say there is a Update?
Guess you updated before shutting down the server?
looks like it. stop server, closed tool, open tool and started server again.
works now, only issue is it over written the CMD files and started a new game with the default dedicated.yaml. Had to go change it back to my servers dedicated.yaml file. so somewhere something isn’t right as the config is my servers yaml file
Hey,
ok good to hear.
About the dedicated. Some Game-Versions will overwrite the yaml and cmd. But 5.3 should have not done it (at least our server was not overwritten). But its not tool related, the tool only uses the yaml to read the telnet-config, but makes no changes.
that’s the thing I ran 1.29 fine except for player online stats with 5.3 and double checked that yaml wasn’t overwritten. it only overwrote when I update to 1.32.2
Did this ever get resolved? Ive seen many people asking about it and know a few admins who are still using the old version as none of the new ones work for us.
Not one of the releases of EAH this year have worked for me on either of my servers and just like other people i have no issues with the old “pre mod mode” version.
Shame as it was a brilliant tool when it worked!
Hey,
I did not hear any complaints anymore. The last Version was working fine.
If you still have Issues try do do the following.
What EAH Version do you have?
What Game Version do you have?
Do you use the Playfield Designer?
Do you use any other Mod?
Stopp your Server.
Stopp EAH
Go to: …SteamLibrary\steamapps\common\Empyrion - Dedicated Server\Content\Mods
Delete all folders there. If you used the Playfield Designer you might have had one Version that made EAH-MOD stopp working.
Start EAH.
Check …SteamLibrary\steamapps\common\Empyrion - Dedicated Server\Content\Mods\EPM
There should be a EPM.DLL and a Config.txt
Start the server.
If it does not work, let me know. Then I could check it via Teamviewer or so.
Thanks for letting me know.
Hello Jascha,
Thank you for your very fast response!
I have tried the latest versions (1.35.02 for A6 on my Alpha 6 server and 1.35 on my 5.5 server).
Yes i have used the Playield Designer (and still do), only to check the sytax of my yamls was ok.
No other mods.
I will give your instructions a go and report back.
Thank you for your time.
Hello Jascha,
I did as you said but unfortunately no success. The server starts fine but the EAH tool (1.35.03 Alpha 6 on a Alpha 6 server) doesnt seem to connect.
No players on the server and the update button doesnt refresh. I know there is someone on the server as im using the Dedicated.cmd not _NoGraphics.cmd so i can see who and how many are on.
I noticed after i started EAH, which was after deleting EPM (the only thing in mods folder), the only file in there was the EPM.dll, not the Config.txt. However after i started the server the Config.txt and a Log.txt appear.
Thanks again.
Hey,
that is really wired. So the Mod folder looks good, that should not be the problem.
Maybe its the EAH Config. Can you check your settings.
On the Setup Page check the following:
It should be set up like that. No other IP is allowed at the moment.
You are also running the tool directly on the server right?
Hello,
Yes, I can confirm those are my settings. I have not changed it.
And yes im running the tool on the server machine.
Server is Windows 10 home.
Thanks.
Hi Jascha,
Are there any other know issues with running this on Windows 10 home that you know of?
I have checked dotnet and enabled all profiles, is there anything else the tool uses?
Also are there know communication problems due to virus checkers or other software being installed or missing?
I would really like to get this working as its a great tool and no doubt its even better now as I’m stuck using a version from last year.
I’ve also noticed the old version I’m using will connect to the A6 server and receive chat and player lists from the server, but the newest (A6 EAH Tool) version doesn’t seem to receive any information.
Thanks